My Blog

Posts for tag: orthodontic treatment

GetAheadofaDevelopingCross-BitewithThisEarlyInterventionMeasure

Applying braces or clear aligners to move misaligned teeth is only part of an orthodontist's overall mission to eliminate poor bites (malocclusions). Sometimes a malocclusion isn't caused by the teeth at all—the size of the jaw is the problem!

One type in particular, a cross-bite, often happens because the upper jaw has developed too narrowly. As a result, many of the upper teeth fit inside the lower, the opposite of normal. But a tool called a palatal expander can alleviate the problem if it's applied at an early enough age.

The device works because the upper jawbone initially forms as two halves that fit together along a center line in the roof of the mouth (the palate) running from the back of the mouth to the front. These two bone halves remain separate during childhood to facilitate jaw growth, but eventually fuse around puberty.

Consisting of two sets of wire arms joined together by a hinge mechanism in the middle, the expander device is positioned up against the palate. The orthodontist extends each arm to press against the inside of the back teeth, then adds more outward pressure by turning the mechanism in the middle with a small key. During wear, the patient or caregiver will turn the mechanism in the same way to keep up the pressure on the two sides of the jaw.

This continual pressure keeps the two bones moving away from each other and maintaining a center gap between them. In response, more bone forms on the two halves to fill the gap. In time, the newly formed bone should widen the jaw enough to correct any developing malocclusion.

Timing is everything with a palatal expander—if not used before the jaw bones fuse, the patient will need a surgical procedure to separate the bones to pursue treatment. To catch the problem early enough, children should have an orthodontic evaluation on or before they turn six. An orthodontist may be able to identify this or other emerging bite problems and intervene before it becomes worse. Taking this approach can help save you and your child more expensive orthodontic treatment down the road.

If you would like more information on correcting poor bites, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Palatal Expanders: Orthodontics is more than just Moving Teeth.”

By Richard R. Marek, DDS
April 08, 2019
Category: Oral Health
BeatDentalPlaqueWhileWearingBraceswithTheseToolsandTips

Wearing braces will probably never make your list of Most Pleasurable Life Experiences: you'll have to avoid certain foods and habits, endure some occasional discomfort, and perhaps feel some embarrassment about your appearance. The good news, though, is that at worst, these are mostly no more than inconveniences and additionally they're well worth the straighter, more attractive smile you'll achieve.

But there's one downside to braces that can lead to something more serious. The braces hardware makes brushing and flossing more difficult—and that could increase your risk of dental disease.

The principal goal of oral hygiene is to remove dental plaque, a thin film of accumulated bacteria and food particles that can cause tooth decay or periodontal (gum) disease. Without effective brushing and flossing, plaque can build up quickly and make the chances of having either of these two diseases more likely.

Not only does the braces hardware hinder your toothbrush's or floss's access to the parts of the teeth it covers, but it can also create "hiding places" for plaque build-up. Several studies have found that braces wearers on average have up to two to three times the plaque build-up of non-braces wearers.

There are ways, though, to make hygiene easier while wearing braces, particularly with flossing. Floss threaders or interproximal brushes can both be used to access between teeth while wearing braces. Another option is a water flosser or irrigator that sprays pressurized water between teeth (and beneath brackets and wires) to remove plaque. And braces wearers can get a prevention boost with topical fluoride applications or antibacterial mouth rinses to reduce disease-causing bacteria.

Besides taking a little extra time with brushing and flossing, you can also boost your mouth's health with good nutrition choices, less sugar consumption and keeping up regular dental visits. And, you should also see your dentist promptly if you notice any signs of tooth or gum problems—the sooner you have it checked and treated, the less damage any dental disease is likely to cause.

It's not easy keeping your teeth and gums plaque-free while wearing braces. But with a little extra time and effort, a few helpful tools and your dentist's support, you can maintain a healthy mouth during orthodontic treatment.

If you would like more information on best hygiene practices while wearing braces, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Caring for Teeth during Orthodontic Treatment.”

By Richard R. Marek, DDS
March 09, 2019
Category: Dental Procedures
TheCaseforMovingJustaFewTeethOrthodontically

We often associate orthodontics with moving several teeth on the upper or lower arches (or both) with braces or clear aligners. But not all patients require a major endeavor — sometimes only one or a few teeth need to be moved, and not very far.

A slight gap between the two upper front teeth is one type of situation that only requires minor tooth movement: just a few teeth need to be moved and usually just a millimeter or two. The appliances needed to achieve this are also relatively simple in design: removable retainers or small scale fixed braces with small springs or elastics that place pressure against the teeth. The process may also only take a few months rather than two years as with major tooth movement.

Preparing for the procedure, though, must be undertaken with great care. We need to first determine if moving the teeth even slightly could affect the bite with the opposite teeth. We must also ensure the roots of the teeth intended for movement are in good position for allowing the space to be closed.

We must then consider the other supporting structures for the teeth. It’s important for gums and bone to be healthy — if not, treating any found disease may be necessary first before beginning orthodontics. And, if the gap between the two upper teeth was created by an abnormally large frenum, the small strip of tissue connecting the lip to the upper gum, it may be necessary to remove it before tooth movement can begin to ensure the closed gap stays closed.

Like any other orthodontic treatment, minor tooth movement first requires a thorough examination with x-ray imaging to determine the exact tooth position, bite issues and the surrounding gum and bone health. We can then be reasonably certain if this straightforward procedure is right for you, and could help you obtain a more attractive smile.

If you would like more information on different orthodontic treatment choices, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Minor Tooth Movement.”

By Richard R. Marek, DDS
January 28, 2019
Category: Dental Procedures
3WaysOrthodonticTechniquesCouldPreventaPoorBite

While orthodontists can effectively correct most poor bites (malocclusions), some can be quite complex requiring much time and expense. But there's good news—we often don't have to wait on a malocclusion to fully develop if we catch it in time. Thanks to interceptive orthodontics, we may be able to intervene much earlier and eliminate or reduce the degree of difficulty with treatment.

Interceptive orthodontics is a group of techniques and devices used in early childhood to help deter a possible malocclusion. Here are 3 ways this approach could make a difference in your child's bite development.

Guiding jaw growth. On a normal-sized upper jaw, the permanent teeth usually have ample room to erupt. Not so with a smaller jaw: incoming teeth become crowded and may erupt out of alignment or too close to each other. Orthodontists often use a device called a palatal expander to aid an under-sized jaw in its development. The device fits along the roof of the mouth between the teeth and applies gradual outward pressure on them. This encourages the jaw to widen as it grows, thus providing more room for erupting teeth to come in properly and decrease the chances of obstructive sleep apnea in the future.

Reshaping and repositioning jaw bones. An overbite can occur when the jaws aren't properly aligned, often due to poor muscle and bone development. This is where devices like the Herbst appliance are useful. Its hinge mechanism encourages the lower jaw to grow further forward. The jaws can thus develop in a more normal way, minimizing the development of a malocclusion.

Maintaining space. Primary ("baby") teeth are important for dental development because they help guide future permanent teeth to erupt properly; they also keep nearby teeth from drifting into the intended space. But when a primary tooth is lost prematurely due to disease or trauma, the space can become vulnerable to this kind of "drift." With a simple mechanism called a space maintainer we can hold open the space created by a prematurely lost primary tooth until the permanent tooth is ready to erupt.

These and other techniques can help stop bad bites from developing in young children, minimizing or even eliminating the need for future orthodontic treatment. That means a healthier mouth for your child and less impact on your wallet.

If you would like more information on interceptive orthodontics, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Interceptive Orthodontics: Timely Intervention can make Treatment Easier.”

AnchorsMakealltheDifferenceinSuccessfulOrthodonticTreatment

Orthodontics shares a principle with the classic tug of war game: if you want things to move in the right direction you need a good anchor. Anchors help braces and other appliances apply constant pressure to misaligned teeth in the direction they need to go to correct a malocclusion (poor bite).

Orthodontic treatments work in cooperation with an existing oral mechanism that already moves teeth naturally in response to biting forces or other environmental factors. The key to this mechanism is an elastic tissue known as the periodontal ligament that lies between the tooth and the bone. Besides holding teeth in place through tiny attached fibers, the ligament also allows the teeth to move in tiny increments.

Braces’ wires laced through brackets affixed to the teeth exert pressure on them in the desired direction of movement –the periodontal ligament and other structures do the rest. To maintain that pressure we need to attach them to an “anchor”—in basic malocclusions that’s usually the back molar teeth.

But not all malocclusions are that simple. Some may require moving only certain teeth while not moving their neighbors. Younger patients’ jaws and facial structures still under development may also need to be considered during orthodontic treatment. That’s why orthodontists have other anchorage methods to address these possible complications.

One example of an alternate anchorage is a headgear appliance that actually uses the patient’s skull as the anchor. The headgear consists of a strap running around the back of the head and attached in front to orthodontic brackets (usually on molar teeth). The pressure it exerts can trigger tooth movement, but it can also help influence jaw development if an upper or lower jaw is growing too far forward or back.

Another useful anchorage method is a tiny metal screw called a temporary anchorage device (TAD) that is implanted into the jawbone above the teeth through the gums. Orthodontists then attach elastic bands between implanted TADs and specific braces’ brackets or wires to exert pressure on certain teeth but not others with pinpoint accuracy. After treatment the TADs can be easily removed.

Using these and other appliances allows orthodontists to customize treatment to an individual patient’s particular malocclusion. With the right anchor, even the most complex bite problem can be transformed into a beautiful and healthy smile.

If you would like more information on orthodontic treatment, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Orthodontic Headgear & Other Anchorage Appliances.”